Are you experiencing an uninviting black screen after installing new RAM? Perhaps this has happened to you before – both scenarios are equally frustrating!
Don’t fret! In this article, we’ll provide some easy fixes for the dreaded black screen bug.
Fix 1: Use the System Restore Option
If your system is suffering from a headache-inducing crash shortly after installing new RAM, don’t fret–there’s an easy fix!
Unlock the bootable restore option on Windows 10:
- Right-click the desktop and select Properties.
- Select the System Protection tab (if necessary) and then click Unlocked if it isn’t already highlighted.
- Click Apply or OK to validate changes; afterward, click Set Lock again to re-enable the feature.
Fix 2: Try a Fresh Installation
Sometimes, simply reinstalling Windows 10 and replacing the RAM is all that’s required to rectify this issue. This isn’t a particularly laborious task – just remember to back up any important data before proceeding!
If your computer struggles to boot even after performing an OS install fresh from scratch, don’t despair. Just be sure not to create any new user accounts that could result in conflicts with any saved files; instead, log in and out until everything has been reloaded properly onto your device.
Fix 3: Check Your Power Settings
If you are having trouble booting your system after installing new RAM, an easy fix is to take a look at its power management settings. This is typically done through the BIOS or UEFI options of your particular motherboard.
Ensure that all the power-management options in your system’s BIOS are set to their most advantageous setting(s). Some motherboards have built-in voltage regulators which can stabilize voltages under heavy load; this can prevent crashes and ensure stable operation during long hours of usage.
If possible, utilize your motherboard’s PCI Express (PCIe) Power Management features. These give users granular control over when the processor state transitions between asleep and awake states, allowing for more precise power management over individual components within the system – such as RAM modules!
Fix 4: Update Your Graphics Driver
If the black screen issue remains, then it may be time to update your graphics driver. To do this, find the appropriate listing from Nvidia or AMD—which is often found on their respective websites.
Ensure that you have an up-to-date version of the software installed for optimum performance. If there is anything left over from a previous installation, you may encounter issues when attempting to install the latest version.
Relying upon an outdated graphics driver could cause you serious headaches if problems arise with installing new RAM, updating a motherboard BIOS or upgrading other hardware components.
Fix 5: Disable the Secure Boot Feature
To solve the black screen bug, you can simply disable Secure Boot in your BIOS. Here’s how to do it:
- Gently press and remove any key on the keyboard such as Delete, Backspace, or Tab.
- Access the BIOS configuration screen by pressing Delete again. Navigate to the Security tab; ensure that UEFI is enabled.
- Finally, ensure the Secure boot feature is unselected (it should be disabled by default) before saving changes and exiting out of BIOS options.
Fix 6: Add RAM in the Motherboard BIOS
For those of you with a lower-capacity RAM module, removing it and popping in another one may yield success. Despite this rudimentary solution being the most commonly adopted, motherboard manufacturers provide users with an array of BIOS options regarding RAM sizing.
If your system’s BIOS only lists two or three slots for RAM modules—or even four or five if you’re lucky—it’s possible that adding more memory won’t increase performance beyond a certain level. This is where your system’s chipset comes into play: its function determines how much RAM can be utilized by each slot! If yours doesn’t support more than the maximum amount of RAM slots on your motherboard, then you’ll need to purchase an upgrade.
Final Word
Are you experiencing this issue after upgrading RAM? Do not fret – there is a quick and effective workaround available!
Unlock the boot BIOS, remove the old memory modules and slot them into the board one by one until you find the correct combination. Then, restart your system and see if that provides any relief. If so – then congratulations! You have successfully resolved this vexing problem!
Don’t forget to share your experiences with us in the comments section below; don’t forget to give our guide a review if you found it helpful!
Conclusion
After installing new RAM, one of the most common complaints is encountering a ‘black screen’ error message.
If you’ve encountered this issue, don’t panic! It’s quite easy to rectify; simply re-install your operating system and applications or perform a factory reset on your device.
Additionally, there are several additional methods for recovering from this unfortunate mishap. From downloading an updated video driver or switching to a screen saver, you can always restore normal visual capabilities once again.
